Concrete Moisture & pH Testing in Alabama

Know what’s happening inside your concrete before selecting or installing a flooring system.

Alabama Coatings & Painting provides concrete moisture and pH testing for commercial and industrial facilities throughout Alabama. We evaluate slab conditions using recognized testing methods to provide measurable information about the concrete before a flooring or coating system is selected.

A concrete surface can appear completely dry while significant moisture is present within the slab. Testing helps identify conditions that could affect the performance of epoxy, urethane, adhesives, and other flooring systems.

Every floor is different. We evaluate the condition of the concrete, surface profile, moisture concerns, traffic levels, and facility use before recommending the right coating system.

Testing, Results & Recommendations

You don’t have to hire us to install a floor to have us test it.

Alabama Coatings & Painting can provide concrete testing as a standalone service. After testing is complete, we can review the results with you and explain what the readings indicate about the slab.

If you only need testing and documentation, our involvement can end there.

If you would like help determining what to do next, we can also evaluate the intended use of the floor and recommend appropriate coating or flooring options based on the test results, substrate conditions, facility environment, and manufacturer requirements.

When requested, we can take the project from testing and system selection through surface preparation and installation.

Why Test Multiple Areas of a Concrete Floor?

Moisture conditions can vary significantly from one area of a concrete slab to another.

On one recent floor evaluation, in-situ RH testing produced readings ranging from approximately 83% to 98% relative humidity at different test locations.

The surface itself may not reveal those conditions. Testing multiple locations provides better information about what is happening within the slab and allows the results to be compared with the requirements of the proposed flooring system.

This information can influence product selection, moisture-mitigation requirements, surface preparation, and the overall flooring approach.

Why Concrete Moisture Testing Matters

Moisture-related flooring problems can become expensive after a coating has already been installed. Excessive moisture or unsuitable slab conditions can contribute to blistering, delamination, loss of adhesion, discoloration, and premature flooring failure.

Testing does not replace the flooring manufacturer’s requirements, but it provides important information that can be used when selecting an appropriate system.

At Alabama Coatings & Painting, we believe the flooring decision should start with understanding the concrete—not simply choosing a coating and hoping the slab is suitable for it.

What types of concrete testing do you perform?

We provide in-situ relative humidity (RH) testing, calcium chloride moisture vapor emission testing, pH testing, and general concrete floor evaluations depending on the needs of the project.

Do you provide the test results?

Yes. We document the testing and can review the results with you so you understand the conditions identified during the evaluation.

How many moisture tests does my floor need?

The appropriate number and location of tests depends on the size of the area, test method, project requirements, and applicable testing standard. We determine the testing layout based on the specific project.

Can a concrete floor look dry and still have a moisture problem?

Yes. Surface appearance alone does not tell you how much moisture is present within a concrete slab. In-situ RH testing measures conditions inside the concrete.

Can you recommend a flooring system based on the results?

Yes. If requested, we can evaluate the testing results along with facility use, traffic, chemical exposure, substrate condition, and manufacturer requirements to help identify appropriate flooring or coating options.

Do I have to hire ACP to install the floor?

Concrete testing can be provided as a standalone service. If you need additional help afterward, we can also provide system recommendations, surface preparation, and complete flooring installation.

What Makes Our Process Different

Every concrete floor is different. We evaluate the condition of the slab, moisture concerns, traffic levels, and how the space will be used before recommending a coating system designed for long-term performance.

We Recommend the Right System

We do not use a one-size-fits-all approach. We recommend epoxy, polyaspartic, decorative flake, clear sealers, or other systems based on your facility’s needs.

We Evaluate the Concrete

When needed, we perform moisture testing and concrete core sampling to identify potential issues before coating installation begins.

We Focus on Long-Term Performance

Proper surface preparation and system selection are critical to durability. Our goal is to install floor coatings that perform well in real operating conditions.

Family-Owned Alabama Business

As a local, family-owned company, we take pride in responsive communication and building long-term relationships with our clients.
Group 29 (3)
Group 29 (3)

Need to Know What’s Happening in Your Concrete?

Whether you’re planning a new flooring system, investigating an existing coating failure, or simply need documented concrete moisture and pH testing, Alabama Coatings & Painting can help.